GRANBY GREENSHIELD PROTEC20 FUEL OIL TANK

• BETTER EXTERNAL PROTECTION
  Improved polyurethane coating could resist to pressure up to 25 psi, ensuring higher safety and protection against leakage caused by external corrosion.
• LIFETIME PROTECTION
  Polyurethane finish prevents external corrosion and is UV resistant to protect colors.
• 20-YEAR EXTENDED WARRANTY*
  Granby Tanks can significantly extend tank lifespan and offer a 20-year manufacturer’s warranty plus $2 million in insurance coverage.

* Some restrictions may apply.

See the Granby withstand a pressure test of 25 psi here!

ROTH DOUBLE-WALL FUEL-OIL SAFETY TANK ®

• Galvanized, weld-free, steel outer tank
  
• Seamless, and weld-free, and corrosion resistant inner tank
  
• Pipe connections above the oil level
  
• Minimum floor space needed
  
• Storage capacity can be increased by using 2 or more tanks
  
• Removable base for easy access
  
• Best warranty for similar tanks*
  

* Subject to limitations and conditions described in the warranty certificate.

WEIL-MCLAIN WTGO

BIASI B-10

• Energy Star® compliant
• Compact size
• Limited lifetime warranty

THERMOFLO OWB/OWT

• Factory Packaged
• Factory Tested
• Easy service
• High efficiency oil burner
• Rear flue outlet
• Cast iron sections with built-in air separator
• Insulated heavy-gauge steel jacket
• Limited lifetime warranty

THERMO PRIDE PREMIER

• Quieter start up, greater efficiency, and more comfortable operation due to infinite fan motor speeds.
• Delivery of comfortable airflow in both the heating and cooling modes.  On a call for heat or cooling the blower motor starts at the slower speed and builds to the correct running speed.
• Automatically compensates for restricted ducts or a dirty air filter by increasing the motor speed.
• Energy bills will be lower due to quieter efficiency of the ECM motor (especially when you run the blower for long periods of time.)
• Reduced fan speeds will run quietly and save energy when the blower runs constantly as with air filtration, for example.

THERMOFLO CENTENNIAL HIGH/LOW BOY

• AFUE's to 85.9%
• HEAT EXCHANGER - Heaviest in the industry, Front flue with top or right side venting option, Interior baffling for maximum efficiency, Dual spring-loaded clean-out ports for easy service and maintenance, Spring-loaded observation port with test port, Heavy gauge burner mounting plate with studs and nuts.
• BLOWER - Belt drive or multi-speed direct drive, Slide-out blower/motor – easily removed for service.
• CABINET - Appliance finish powder coat paint, Heavy gauge with "Seal-Tite" construction, Foil-faced insulation for hand-cool surface,  Fully-enclosed burner and controls.
• COMBUSTION CHAMBER - Preformed slide-out chamber for easy service.
• BURNDERS AND CONTROLS - Factory-wired with simple plug-in connections, PSC motor, Solid state ignitor.

ARMSTRONG 80 ENHANCED HIGH/LOW BOY

• Designed to accommodate your comfort needs.
• Factory-supplied air filter assembly, to give you the option of adding a system.
• Constructed with dependable features for long product life.
• Limited Lifetime HX Warranty on the heavy-duty heat exchanger
• Limited Five-Year Warranty on parts.
• Quiet Operation
• Fully foil faced insulated cabinet and an acoustically insulated burner enclosure.
• Combustion chamber and a dynamically balanced blower assembly with robust bellyband mounting.
• Keeps operating sound to a bare minimum.
• Beckett burner for reliable combustion
• Solid state ignition for hotter spark.
• Equipped with a PSC burner motor for reduced power consumption.

BRADFORD AERO® SERIES

• Factory installed Hydrojet® Total Performance System (Center Flue models only)
• Vitraglas® lined tank
• Flexible stainless steel baffle (Center Flue models only)
• Fiberglass insulation
• Ceramic fiber combustion chamber
• Protective magnesium anode rod(s)
• Brass drain valve
• Low operating costs
• High recovery rates
• Installed T&P relief valve
• Six year limited warranty on tank
• Two year limited warranty on parts
• Two year limited warranty on burners

SUPERSTOR HOT WATER HEATER

• Heavy gauge metal jacket with trouble-free appliance finish.
• Glass lined, long life heavy duty steel tank.
• Two anode rods for extra protection and longer tank life.
• Beckett AFG oil burner w/ Honeywell control for extra high efficiency.
• Well-mounted control for extra fast reaction time.
• Ceramic fiber combustion chamber 1 1/2" thick for extra life.
• 2" hinged sight door with 5/16" test pot.
• Center flue / rear flue combo.
• Combustion efficiency 82%+.
• Designed with all the new energy standards in mind!

RHEEM 14AJA SERIES

• CABINET OPTIONS
• FAN MOTOR MOUNT
• BASE PAN
• EASY SERVICE ACCESS

RHEEM RAPC SERIES

RHEEM RAPC SERIES

• CABINET OPTIONS
• FAN MOTOR MOUNT
• BASE PAN
• EASY SERVICE ACCESS

ARMSTRONG 213LE SERIES

• RELIABILITY
• QUIET OPERATION
• ENERGY EFFICIENCY

GOODMAN SSX14

• High-Efficiency Scroll Compressor
• R-410A Environmentally Friendly Refrigerant
• Entire Unit Run-Tested in Factory before Shipment
• Unique Louvered Sound Control Top for Quiet Operation
• High-Quality Compressor Sound Blanket
• Performance Certified in Accordance with the Air
• Conditioning and Refrigeration Institute (ARI)

GOODMAN GSC13

• Energy Efficient Compressor
• R-22 Refrigerant
• Entire Unit Run-Tested in Factory before Shipment
• Unique Louvered Sound Control Top for Quiet Operation
• Legendary Goodman Quality and Durability
• Performance Certified in Accordance with the Air Conditioning and Refrigeration Institute (ARI)

Intellicon®-FA (For Hot Air Systems)

• Patented process reduces fuel consumption—typically 10% to 20% or more
• Illuminated LCD display shows fuel consumption savings, operating modes, system diagnostics and
  operating temperatures
• Saves fuel without replacing or upgrading costly system components and without violating manufacturers’ warranties
• Saves energy without sacrificing comfort
• Guaranteed to reduce system run time
• Short payback period—typically 4 to 18 months
• Field-tested and validated energy-saving control
• Works with any thermostat including setback and multi-zone thermostats
• UL listed, “Energy Management Equipment”
• “State-of-the-art” microcomputer controller
• Easily installed plug-in sensor(s) (includes 1 required sensor)
• Reduces maintenance and extends furnace life
• 15-year replacement warranty for breakdowns or defects

For complete details and specs, download the PDF here.

Intellicon®-HW+ (For Hot Water Systems)

• For systems up to 300,000 BTU
• Illuminated LCD display shows fuel consumption savings, operating modes, system diagnostics and
  operating temperatures
• Patented process reduces fuel consumption—typically 10% to 20%
• Short payback period—typically 12 to 24 months
• UL listed, “Energy Management Equipment”
• Increased savings without replacing or upgrading costly system components
• “State-of-the-art” microcomputer controller
• No programming or follow-up visits required
• Maximum efficiency year-round
• Reduces maintenance and extends boiler life
• Guaranteed to reduce fuel consumption
• 15-year replacement warranty for breakdowns or defects

For complete details and specs, download the PDF here.